Deutsch
Ivoclar
-
IPS E.MAX CERAM GLAZE POWDER FLUO5GSKU: 597045
IPS e.max Ceram Glaze is available in both the tried-and-tested paste form and in powder form. The glazing material is applied to all areas of the restoration that have been veneered using IPS e.max C... Learn More€ 46.95 -
IPS E.MAX CERAM OPAL EFFECT 1 20GSKU: 596990
The Opal Effect materials are available in six shade gradations. Starting with Opal Effect 1 – with naturally enhanced opalescence and simultaneous high translucency – the brightness value between Opa... Learn More€ 62.95 -
IPS E.MAX CERAM OPAL EFFECT 2 20GSKU: 596991
The Opal Effect materials are available in six shade gradations. Starting with Opal Effect 1 – with naturally enhanced opalescence and simultaneous high translucency – the brightness value between Opa... Learn More€ 62.95 -
IPS E.MAX CERAM OPAL EFFECT 3 20GSKU: 596992
The Opal Effect materials are available in six shade gradations. Starting with Opal Effect 1 – with naturally enhanced opalescence and simultaneous high translucency – the brightness value between Opa... Learn More€ 62.95 -
IPS E.MAX CERAM OPAL EFFECT 4 20GSKU: 596993
The Opal Effect materials are available in six shade gradations. Starting with Opal Effect 1 – with naturally enhanced opalescence and simultaneous high translucency – the brightness value between Opa... Learn More€ 62.95 -
IPS E.MAX CERAM OPAL EFFECT 5 20GSKU: 596994
The Opal Effect materials are available in six shade gradations. Starting with Opal Effect 1 – with naturally enhanced opalescence and simultaneous high translucency – the brightness value between Opa... Learn More€ 62.95 -
IPS E.MAX CERAM OPAL EFFECT VIOLET 20GSKU: 596995
The Opal Effect materials are available in six shade gradations. Starting with Opal Effect 1 – with naturally enhanced opalescence and simultaneous high translucency – the brightness value between Opa... Learn More€ 62.95 -
IPS E.MAX ZIRC.INL.MO 0 B85 L22 1pieceSKU: 605471
IPS e.max ZirCAD is a yttrium-stabilized zirconium oxide block. It is suitable for indications that require high strength, such as posterior bridges.IPS e.max ZirCAD demonstrates the high final streng... Learn More€ 338.95 -
IPS E.MAX ZIRC.INL.MO 1 B85 L22 1pieceSKU: 608506
IPS e.max ZirCAD is a yttrium-stabilized zirconium oxide block. It is suitable for indications that require high strength, such as posterior bridges.IPS e.max ZirCAD demonstrates the high final streng... Learn More€ 338.95 -
IPS E.MAX ZIRC.INL.MO 2 B85 L22 1pieceSKU: 608507
IPS e.max ZirCAD is a yttrium-stabilized zirconium oxide block. It is suitable for indications that require high strength, such as posterior bridges.IPS e.max ZirCAD demonstrates the high final streng... Learn More€ 338.95 -
HELIOBOND FL 6GSKU: 532907AN
The light-curing bonding agent Heliobond optimizes the enamel etching procedure in conjunction with all light-curing restorative materialsAdventagesFor optimum marginal seal between tooth and composit... Learn More€ 68.95 -
EXCITE F SINGLE DOSE 50X0,1G REF.PASKU: 630377WW
ExciTE F is a light-curing, fluoride releasing, single-component total-etch adhesive. It is used in the placement of direct restorations (composites, compomers) as well as in the adhesive luting of in... Learn More€ 167.95 -
EXCITE F 5G FLSKU: 630375WW
ExciTE F is a light-curing, fluoride releasing, single-component total-etch adhesive. It is used in the placement of direct restorations (composites, compomers) as well as in the adhesive luting of in... Learn More€ 139.95 -
EXCITE F 2X5G FLSKU: 630376WW
ExciTE F is a light-curing, fluoride releasing, single-component total-etch adhesive. It is used in the placement of direct restorations (composites, compomers) as well as in the adhesive luting of in... Learn More€ 244.95 -
IPS KERAMIK ÄTZGEL SORTSKU: 531550
The IPS Ceramic Etching Gel is used for the creation of retentive bonding surfaces on all-ceramic restorations to prepare for cementation. It enhances the bonding effect between the composite cement a... Learn More€ 88.95 -
IPS KERAMIK ÄTZGEL FL 5MLSKU: 531548
The IPS Ceramic Etching Gel is used for the creation of retentive bonding surfaces on all-ceramic restorations to prepare for cementation. It enhances the bonding effect between the composite cement a... Learn More€ 45.95 -
Autom. Temperatur Kontrollset 2 - ATK2SKU: 598833
The automatic temperature checking set ”ATK2” is used to check and adjust the firing temperatures in furnaces with automatic calibration programs for the ATK2 system (e.g. Programat CS, P500, P700, EP... Learn More€ 290.95 -
IPS NATURAL DIE FARBSCHLÜSSEL 1pieceSKU: 597090
The shade guide enables optimum selection of the die shade after preparation.
Learn More
Delivery Form
1 x IPS Natural Die Material Shade Guide€ 66.95 -
FARBSCHLÜSSEL EMP.CAD HT/LT A-D 1pieceSKU: 603418
To prevent cross-contamination in the oral cavity, the individual tabs and the entire shade guide are autoclavable. This material shade guide shows the A-D and Bleach shades in which the IPS Empress ... Learn More€ 66.95 -
IPS® Modellierliquid allround 60mlSKU: 673375
IPS® Modellierliquid allround 60ml Learn More€ 25.95
- Preparation
- Digital Impression
- Software
- Production
- Elastic Impression Aid
- Placement
- Bite Registration Material
- Bleaching
- CAD/CAM Spray
- Disinfection and Cleaning
- Diagnostic Agents
- Shade Taking
- CAD/CAM Plaster
- Instruments
- Rubber Dam Technique
- Temporary Solutions
- Scan Wax
- Other Products
- Root posts/Core Build-ups
- S A L E
